Rugged, micro-sized personal noise dosimeters combine power and simplicity and are also available with intrinsic safety approvals to permit use in hazardous areas. Small in size and lightweight, the dosimeters are worker friendly they appreciate not having to wear a bulky, heavy dosimeter on their belt. Cost of ownership is lessened, too, as the integral microphone is far less likely to be damaged than traditional cable mounted microphones
Perfect for all your personal noise dosimetry measurements, the features a single measurement range from 65 to 140 dB to cover all levels required by OSHA, ACGIH and various other regulatory compliance or best-practice protocols. Peak levels up to 144 dB are captured as well. The needs no user setup or advance configuration to meet all current noise dose requirements since 5dB and 3 dB exchange rates are captured at the same time in the same run. Virtually any combination of threshold and criterion level can be analyzed after the measurement using the powerful Casella Insight software to obtain the required TWA result.
cel 350 personal noise dosimeters:
All Noise dosimeters are provided with a locking foam windscreen and 2 pairs of fixing clips to attach to the worker. Both pairs of alligator and pin clips are provided with every dosimeter and other mounting clips are available as accessories. tandard kits are provided that include up to 12 individual dBadge dosimeters plus all the required accessories under the part number where X can be anything from 1 to a maximum of 12 individual dosimeters. Included in the kits are the dosimeter(s), the appropriate number of charger bases, a power supply, a high speed USB infrared interface for communication with the computer, an acoustic calibrator, a copy of Casella Insight software and a foam lined kit case. Kits of 1 to 3 dosimeters include a single charger base, kits of 4 to 6 include 1 master charger and 1 slave charger. Additional slave chargers plus a short link cable are provided for kits from 7 to 12 as needed.